Well, I havent done much with the car as of late, so i decided to drive it to autozone to get checked for codes because I wasnt sure if the CEL was even supposed to be on (CEL burnt out). They scanned it, and it came back with 5 codes, 1 for the EGR, and the other 4 for each cylinder. I wish I wouldve written down the exact codes, but all I remember is it was something about the exhaust gas recirculation and that something was happening in turn, to all four cylinders.
I drove it home, parked it in the driveway. Went back about 3 or 4 hours later, car wont start. It cranks and will have that noise like its about to compress or something, but once it is JUST about to start, it just doesnt and continues to keep cranking over.
Anyone think that it is my MAP sensor thats f-ed? If so, should I just go 3.5 bar? cuz I cant even find the damn EGR in my car. I have 2 eclipses, and the other one is also 420a (but NOT turboed) and I can see the EGR valve fine, on the passenger side of the engine. God. someone please PLEASE help me
Edit: Alright now the car wont even crank over. It just sits there and does nothing, no cranking at all. I had my dad push me and try to pop start the car, and thats when it started to not even crank anymore. before we tried pop starting it, it cranked, but wouldnt start. now it just does nothing. Anyone have any ideas, or that could come out here and help me... Ill buy you a case or somethin! I would go to a shop, but cant drive!
