MitsuStyle - View Single Post

**v8klla** · 04-21-2007

Enes,

As far as bearings go I would go with Jet and recommend the ACL H-Rated race bearings. The only downside is on the 97+ motors the thrust bearing is the same material as their standard Aluglide series so there is no real advantage to going with the race bearings in regards to preventing crankwalk once again. Now, if it is a 95-96 motor that's a different story as the thrust is built in to the center main bearing (but I recall you having a nicer looking late model 2g).

In that regard, you could probably get a stock 6 bolt long block for a good price, but you are still looking at replacing a lot of components.

Chris

04-21-2007	#10
v8klla Join Date: Oct 2003 Location: Cottage Grove, MN Posts: 2,120	Re: replacing bearings Enes, As far as bearings go I would go with Jet and recommend the ACL H-Rated race bearings. The only downside is on the 97+ motors the thrust bearing is the same material as their standard Aluglide series so there is no real advantage to going with the race bearings in regards to preventing crankwalk once again. Now, if it is a 95-96 motor that's a different story as the thrust is built in to the center main bearing (but I recall you having a nicer looking late model 2g). In that regard, you could probably get a stock 6 bolt long block for a good price, but you are still looking at replacing a lot of components. Chris __________________ Chris Carey, President Modern Automotive Performance P: 763-545-3800 E: chris@maperformance.com We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!