MitsuStyle - View Single Post

Pushit2.0 · 03-26-2007

I think it will work, and I did use a 1/4 of 2" round tube to make the end of the runners, I plan for the plenum to be round as well. Most of the manifold will be inside/outside welded and welding the runners onto the flange took a lot of amps, but not to much rod, about 1/4 to 1/2 of a rod to make it on one side. After the intake its onto the endtank for the IC then fuel system install.

~John

03-26-2007	#477
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Finally getting stuff done on our cars I think it will work, and I did use a 1/4 of 2" round tube to make the end of the runners, I plan for the plenum to be round as well. Most of the manifold will be inside/outside welded and welding the runners onto the flange took a lot of amps, but not to much rod, about 1/4 to 1/2 of a rod to make it on one side. After the intake its onto the endtank for the IC then fuel system install. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.