MitsuStyle - View Single Post

**v8klla** · 02-19-2007

This was just purchased from our website, thought we would share some pics. Let us know what you think!

Stage 2 MAPerformance Cylinder Head

•Hot Tank
•Glass Bead Blast
•Fully Pressure Checked
•Fully Decked Head Surface
•Stage 2 Port/Polish
-Stage 1+
-Full porting of the bowls
•5-angle Valve Job
•New Valve Stem Seals
•1mm Oversize SS Valves
-SI Nitrided (In this case)
•Your Choice of Springs and Retainers
-Manley (In this case)
•Reassembly

Check them out here:

http://www.maperformance.com/store/p...cat=400&page=1

02-19-2007	#1
v8klla Join Date: Oct 2003 Location: Cottage Grove, MN Posts: 2,120	Example of our Stage 2 Cylinder Head This was just purchased from our website, thought we would share some pics. Let us know what you think! Stage 2 MAPerformance Cylinder Head •Hot Tank •Glass Bead Blast •Fully Pressure Checked •Fully Decked Head Surface •Stage 2 Port/Polish -Stage 1+ -Full porting of the bowls •5-angle Valve Job •New Valve Stem Seals •1mm Oversize SS Valves -SI Nitrided (In this case) •Your Choice of Springs and Retainers -Manley (In this case) •Reassembly Check them out here: http://www.maperformance.com/store/p...cat=400&page=1 Attached Thumbnails __________________ Chris Carey, President Modern Automotive Performance P: 763-545-3800 E: chris@maperformance.com We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!