MitsuStyle - View Single Post - Galant VR-4

gvr4_91 · 12-26-2006

Sup guys. im new to this forum and need help with my car so decided to join.

I drive a 91 galant vr4. This is whats up. My wasteguage isn't opening. It close but will not open so my turbo is maxing out which i think may be killing the pistons. This one dude said that anything over 12psi should open the wasteguage, how do i test this out. I'm also new to 4g63t motors too so what do i have to do to fix this problem. Do i have to take off the turbo to replace a new wastegauge. Also my car tops out at 30 mhp and rev up to 2500 or 3000 only. Idle is rough until suddenly sometimes wastegauge decides to work again then you can run it for lil bit but goes back to tha same. help me out guys!

12-26-2006	#1
gvr4_91 New Member Join Date: Dec 2006 Location: BP, MN Posts: 2	Galant VR-4 Sup guys. im new to this forum and need help with my car so decided to join. I drive a 91 galant vr4. This is whats up. My wasteguage isn't opening. It close but will not open so my turbo is maxing out which i think may be killing the pistons. This one dude said that anything over 12psi should open the wasteguage, how do i test this out. I'm also new to 4g63t motors too so what do i have to do to fix this problem. Do i have to take off the turbo to replace a new wastegauge. Also my car tops out at 30 mhp and rev up to 2500 or 3000 only. Idle is rough until suddenly sometimes wastegauge decides to work again then you can run it for lil bit but goes back to tha same. help me out guys!