MitsuStyle - View Single Post - Re-Ringing pistons Questions

Onefast99gsx · 12-11-2006

Yep, I'm gonna do a leakdown test. I have borrowed one from a garage. I just need to get a decent air compressor. Btw- my PCV was replaced with just a straight thru fitting. Both fittings on the valve cover goto a JAZ catch can. I took the hoses off the catch can and i could blow into each one of them without any restrictions. I know it works because i drain the JAZ catch.

Thanks.

12-11-2006	#9
Onefast99gsx Join Date: Sep 2004 Location: Wisconsin Posts: 1,411	Re: Re-Ringing pistons Questions Yep, I'm gonna do a leakdown test. I have borrowed one from a garage. I just need to get a decent air compressor. Btw- my PCV was replaced with just a straight thru fitting. Both fittings on the valve cover goto a JAZ catch can. I took the hoses off the catch can and i could blow into each one of them without any restrictions. I know it works because i drain the JAZ catch. Thanks.