MitsuStyle - View Single Post

Berda · 11-28-2006

So my Eprom blew up on me, only it wasnt the capacitors, it was another component on the board. The car runs lean and when you jump on it, it will sputter and barely accelerate. When I plug in a different ecu, it throws CEL #13 (intake air temp sensor) and #25 (Barometric pressure sensor). It also runs very rich (to the point where I cant even cold start it). The CEL points to the MAS, so I switched it out with another, but the problem still exists. Any ideas?

Thanks,
Adam

11-28-2006	#1
Berda Join Date: Jan 2006 Location: MN Posts: 47	Ecu probs and CEL HELP So my Eprom blew up on me, only it wasnt the capacitors, it was another component on the board. The car runs lean and when you jump on it, it will sputter and barely accelerate. When I plug in a different ecu, it throws CEL #13 (intake air temp sensor) and #25 (Barometric pressure sensor). It also runs very rich (to the point where I cant even cold start it). The CEL points to the MAS, so I switched it out with another, but the problem still exists. Any ideas? Thanks, Adam __________________ '91 TSi AWD Stock - 161.7 AWHP! Sold :( '99 Honda Accord EX Coupe V-6. Last edited by Berda; 11-28-2006 at 08:15 AM..