Quote:
Originally posted by TalonTSiDude+Oct 22 2003, 12:39 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (TalonTSiDude @ Oct 22 2003, 12:39 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-RDlaserRST@Oct 22 2003, 12:20 AM
1000 for a custom fmic i think not. you can get a very nice big core for 400 bucks and piping would only be 100-200 bucks just get the pipes and bring them to a exhuast place and have them weld it for you. can be done cheaper if you buy used parts and such.
|
Please don't listen to Mr. Ghetto Fabulous here, I wouldn't trust an exhaust shop to make a decent exhaust for my car, let along intercooler piping that will need to hold high preasure levels. Completely different welding techniques need to be used for IC piping and exhaust piping. Try preasurizing an exhaust sysyem to 25+ PSI and watch it blow every weld (VPE style yo). [/b][/quote]
im saying most places do have good welders there and probably could do it very well. im not saying having them make the piping either you get the piping and either weld it yourself or have a good welder do it. the spearco intercoolers i am talking about come with end tanks. go check them out on ebay i know a couple people that use them and are very statisfied.