MitsuStyle - View Single Post

Shane55113 · 11-07-2006

You can place the washer in to the head before you put the head on so its sitting there, it'll usually stick b/c of the moly lube. But the nut is not as easy since you have to put it on after the head is on the car and the studs are through the holes.
Does any company offer a tapered progressive valve spring? i believe that would cure this particular problem for anyone who wants to do this same setup in the future.

11-07-2006	#1
Shane55113 Now 20% less Racist Join Date: Mar 2006 Location: St. Paul Posts: 408	Re: Arp nuts + crower springs = bitch You can place the washer in to the head before you put the head on so its sitting there, it'll usually stick b/c of the moly lube. But the nut is not as easy since you have to put it on after the head is on the car and the studs are through the holes. Does any company offer a tapered progressive valve spring? i believe that would cure this particular problem for anyone who wants to do this same setup in the future. __________________ If I spent the same amount of $ on my car as I do on booze I'd have a 9 sec car by now!