MitsuStyle - View Single Post

tpunx99GSX · 11-02-2006

Well tonight i gotta go back to the stocker. had a couple problems that i need to resolve first.
First off: The manifold doesnt have a flange for the sensor on top of the manifold. and doesnt have a spot for this little capacitor looking thingy.
Secondly: Im not sure about this, but does the manifold need to be grounded like the stock one?
Thirdly: (this has already been fixed) but i had to shave the throttle body stop (the metal that the idle adjustment screw screws into) because it was hitting the flange on the manifold.
Fourthly: The car wont start with everything on (except the sensor, and the ground strap and the capacitor thingy) Im not sure if the above is what is wrong with it. or if its something else (like the emmissions shit)
and finally: the Upper IC Pipe that goes from the throttle body needs to be modified or something needs to happen, its pushing into the battery and doesnt connect right up to the other IC piping.
If any of you could shed some light on this it would make me wary wary wappy. thanks
Tom

11-02-2006	#18
tpunx99GSX Tournaments Won: 3 Join Date: Oct 2003 Location: Maple Grove, MN Drives: Lancer and Durango Posts: 7,017	Re: Brown Santa Came early this year... Well tonight i gotta go back to the stocker. had a couple problems that i need to resolve first. First off: The manifold doesnt have a flange for the sensor on top of the manifold. and doesnt have a spot for this little capacitor looking thingy. Secondly: Im not sure about this, but does the manifold need to be grounded like the stock one? Thirdly: (this has already been fixed) but i had to shave the throttle body stop (the metal that the idle adjustment screw screws into) because it was hitting the flange on the manifold. Fourthly: The car wont start with everything on (except the sensor, and the ground strap and the capacitor thingy) Im not sure if the above is what is wrong with it. or if its something else (like the emmissions shit) and finally: the Upper IC Pipe that goes from the throttle body needs to be modified or something needs to happen, its pushing into the battery and doesnt connect right up to the other IC piping. If any of you could shed some light on this it would make me wary wary wappy. thanks Tom __________________ Scientific theories are the most reliable, rigorous, and comprehensive form of scientific knowledge. This is significantly different from the common usage of the word "theory", which implies that something is a conjecture, hypothesis, or guess.