MitsuStyle - View Single Post - anyone have a guage to measure crank endplay?

niterydr · 10-31-2006

John said you can use a feeler gauge between the thrust bearing surface and the crank. It is a bit harder, but still works.
Check both sides to make sure your bearing isn't in there cock-eyed.
John thinks (off the top of his head) that the spec is .002-.0071" Something middle of the road should be fine.

10-31-2006	#2
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: anyone have a guage to measure crank endplay? John said you can use a feeler gauge between the thrust bearing surface and the crank. It is a bit harder, but still works. Check both sides to make sure your bearing isn't in there cock-eyed. John thinks (off the top of his head) that the spec is .002-.0071" Something middle of the road should be fine. __________________ My street car runs low 11's and my race car's personal best is a mid 11....