MitsuStyle - View Single Post - Street car build-up please help!!

**scheides** · 08-22-2006

Theoretically, they cannot handle as much RPM as a 2.0 motor can, because the rods are longer and the crank is bigger (basically). They can make a TON of power though, and yes, they'll all fit in an AWD car b/c they are all basically the same on the outside!

Lots and lots of info on this around the net and on this site, do some searching for more research.

08-22-2006	#32
scheides flips McGee Cribbage Square Champion! Great Mahjong: Classic Champion! Mah Jongg Solitaire Champion! Mahjong Connect Champion! MuMu Champion! Join Date: May 2004 Location: Minneapolis, MN Drives: BeaterX Posts: 12,900	Re: Street car build-up please help!! Theoretically, they cannot handle as much RPM as a 2.0 motor can, because the rods are longer and the crank is bigger (basically). They can make a TON of power though, and yes, they'll all fit in an AWD car b/c they are all basically the same on the outside! Lots and lots of info on this around the net and on this site, do some searching for more research.