MitsuStyle - View Single Post

**JET** · 08-07-2006

Take the actuator arm off, slide another spring (preferably longer with small coils) over the arm. Then weld a washer on the arm, far enough up to give some more pressure. Using a small coil will still allow it to close, it will just take more pressure.

08-07-2006	#7
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Finally getting stuff done on our cars Take the actuator arm off, slide another spring (preferably longer with small coils) over the arm. Then weld a washer on the arm, far enough up to give some more pressure. Using a small coil will still allow it to close, it will just take more pressure. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!