MitsuStyle - View Single Post - Stripped Threads-Help!

Shane55113 · 06-29-2006

everything worked out great! all you have to do is crank the engine over and catch all the oil in a cup, then swab out the holes for about 10 min and then put the insert in. I did have some leaking problems so we doubled up the crush washers between the head and the banjo fitting and it works perfectly, no leaks and my turbo is safe.

06-29-2006	#2
Shane55113 Now 20% less Racist Join Date: Mar 2006 Location: St. Paul Posts: 408	Re: Stripped Threads-Help! everything worked out great! all you have to do is crank the engine over and catch all the oil in a cup, then swab out the holes for about 10 min and then put the insert in. I did have some leaking problems so we doubled up the crush washers between the head and the banjo fitting and it works perfectly, no leaks and my turbo is safe. __________________ If I spent the same amount of $ on my car as I do on booze I'd have a 9 sec car by now!