MitsuStyle - View Single Post

**JET** · 05-03-2006

I run Crower 415's with Crower spings and didn't have a problem at 8k with the springs. You should be fine with any of the cams listed above and the crower springs. Get too big and you will need to check the clearance to the guides. I had to have mine shaved down a bit with the big cams in there.

Idle sounds really nice at 1,200 rpm (bad ISC motor) and it never dies at stop lights or anything.

05-03-2006	#6
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: In the market for cams... I run Crower 415's with Crower spings and didn't have a problem at 8k with the springs. You should be fine with any of the cams listed above and the crower springs. Get too big and you will need to check the clearance to the guides. I had to have mine shaved down a bit with the big cams in there. Idle sounds really nice at 1,200 rpm (bad ISC motor) and it never dies at stop lights or anything. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!