MitsuStyle - View Single Post - block

Pimpin Dsmstyle · 04-18-2006

the threads are 12mm x 1.25 but the problem is NO ONE HAS THIS TAP! I found one single place that can get it but that will take over a week.

I was thinking about using the old head bolts and "re-tapping" the threads *in the block* like that. I was gonna make the ARPS fit but the 5mm heads on them wont allow this heh. The allen or head bolt would get stripped. What are thoughts on this? Or is that way too ghetto?

04-18-2006	#4
Pimpin Dsmstyle Br0k3N Join Date: Aug 2004 Location: Dirty Savage Kid Posts: 172	Re: block - head stud holes the threads are 12mm x 1.25 but the problem is NO ONE HAS THIS TAP! I found one single place that can get it but that will take over a week. I was thinking about using the old head bolts and "re-tapping" the threads in the block like that. I was gonna make the ARPS fit but the 5mm heads on them wont allow this heh. The allen or head bolt would get stripped. What are thoughts on this? Or is that way too ghetto? __________________ - Josh L.P. Last edited by Pimpin Dsmstyle; 04-18-2006 at 07:55 PM..