MitsuStyle - View Single Post

**JET** · 03-17-2006

The 4g63 pistons will obviously not work with the larger bore of the 2.4. Check the other active thread, 2.3 vs. 2.4. That goes over some of it. Do a search, this has been gone through several times.

Keep us posted on the E85 progress. I was getting close to trying it, but never did. What kind of fuel system are you going to? The stock system won't cut it. You need a lot more fuel with E85 than with gas. It will also be hard on the stock rubber lines, so they need to be stainless.

03-17-2006	#6
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Stroking ??'s The 4g63 pistons will obviously not work with the larger bore of the 2.4. Check the other active thread, 2.3 vs. 2.4. That goes over some of it. Do a search, this has been gone through several times. Keep us posted on the E85 progress. I was getting close to trying it, but never did. What kind of fuel system are you going to? The stock system won't cut it. You need a lot more fuel with E85 than with gas. It will also be hard on the stock rubber lines, so they need to be stainless. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!