MitsuStyle - View Single Post

niterydr · 03-11-2006

At this time we don't offer OEM rebuilds. Our minimum for rebuilding motors is Weisco pistons on Eagle rods. With how far these DSM's are pushed, it does not make sence to rebuild it using OEM rods or pistons.
Our shortblocks start at $2700 w/good cores. This is a Weisco/eagle combo with king bearings, all machine work, new front case, and I believe a gasket set.

Your crank might be okay, it just depends upon how bad the bearing is. You can have it turned to a "10/10" if its that bad, and have it re nitrated. Otherwise a good crank goes for the $100-200 range on the used market.

03-11-2006	#2
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: Engine Rebuild At this time we don't offer OEM rebuilds. Our minimum for rebuilding motors is Weisco pistons on Eagle rods. With how far these DSM's are pushed, it does not make sence to rebuild it using OEM rods or pistons. Our shortblocks start at $2700 w/good cores. This is a Weisco/eagle combo with king bearings, all machine work, new front case, and I believe a gasket set. Your crank might be okay, it just depends upon how bad the bearing is. You can have it turned to a "10/10" if its that bad, and have it re nitrated. Otherwise a good crank goes for the $100-200 range on the used market. __________________ My street car runs low 11's and my race car's personal best is a mid 11....