MitsuStyle - View Single Post

rst95eclipse · 03-06-2006

Everyone has told me to do that. My prybar and pickle fork won't do the trick. On the drivers side axle, I tapped on the bearing like it said (rubber mallet, hard plastic mallet, 16 ou framing hammer, 20 ou ball peen, then a 5lb short sledge), same issue. After I unbolted the housing, it just slid right out like it had KY all over. I'm just finding it easier to just unbolt the housing and take it with the axle. The only thing I can forsee working is using a closed wrench underneath.

03-06-2006	#6
rst95eclipse Alias 3 Champion! Ass Hunter Champion! Basil Brush Gobbler Champion! Basketball Shoot-out Champion! Battle Snake Champion! Blasterman Champion! Bloody Rage Champion! Brave The Bar Champion! Bubble Bobble Champion! Bubble Bobble The Rival Champion! Car Park Chaos Champion! DTunnel Champion! Hexxagon Champion! Mario Kart Extreme! Champion! PacMan Jungle Adventure Champion! Pacmania 3 Champion! Q*Bert 2004 Champion! Tournaments Won: 7 Join Date: Feb 2006 Location: Minneapols/Rochester, MN Posts: 734	Re: Trouble getting axle out (Pics) Everyone has told me to do that. My prybar and pickle fork won't do the trick. On the drivers side axle, I tapped on the bearing like it said (rubber mallet, hard plastic mallet, 16 ou framing hammer, 20 ou ball peen, then a 5lb short sledge), same issue. After I unbolted the housing, it just slid right out like it had KY all over. I'm just finding it easier to just unbolt the housing and take it with the axle. The only thing I can forsee working is using a closed wrench underneath.