View Single Post
Old 02-16-2006   #46
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Starting problem

Well I got the ECU in the mail today. He found the following wrong with it

*ECU fails heartbeat on arrival
C44 ground open - repaired
C106 12v pad damaged - repaired
C106 ground pad damaged - repaired
C108 5V pad damaged - repaired
C108 ground pad damaged - repaired
Pin 105 (BCS) open to IC106 pin 1 from prior repairs - repaired
Sensor ground blown - repaired the prior repairs
Cleaned smoke damage from IC106 prior damage
Orignal OEM caps still installed - replaced (I thought you told me these were replaced Jet)

So I put it in the car, cranked it over, no start. Tried it again, and again, and again, no start

Looked under the hood, thought it maybe is a good ideal if I plugged in the CAS (doh)! Cranked her over, SHE'S ALIVE!!!!!

Now onto troubleshooting my insane knock problem!!
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote