[slowbubblecar]

I need a 3" 02 housing made for my new turbo. I have had people interested in doing it, but nobody has time or will set a date to get teh car and make it. I want to get it done asao.

The only parts I have are the 3" 4 bolt flange and gasket. I am guessing it would need to be made by a 90 coming down and maybe another small bend before hitting the downpipe. The downpipe is a thermal 2.5-3", but the thermal one only has about 3 inches or so of 2.5" pipe at the start. The bends on it are 3" along with the flex section. Parts needed would be a 2.5" turbo elbow, 3" 90 degree stainless bend, a little 3" stainless straight pipe, maybe a 45 (or not), a stainless 02 bung and 2 exhaust flanges for the downpipe and 02 housing. If you think you would be able to do the job, either pm me or post here when you would be able to do it and how much it would cost. I don't care how ugly the 02 housing looks as long as it functions well. It would be going on a 2g if that matters.