MitsuStyle - View Single Post - Need an in-home visit.

TheBlizzard · 02-08-2006

Just to make sure you MAS is plugged in for starters, then check to make sure you plugged in the PCV valve, on the back left of the valve cover there is a nipple that the hose goes over. Usually with that hose off it will start and run, but will idle like shit and die often.

I don't have time to come up and check. I wouldn't think it would be a timing issue. Do you know how to check it with the cover on everything on?

02-08-2006	#2
TheBlizzard Join Date: Oct 2003 Location: Red Wing, MN Drives: Too Many Posts: 3,184	Re: Need an in-home visit. Just to make sure you MAS is plugged in for starters, then check to make sure you plugged in the PCV valve, on the back left of the valve cover there is a nipple that the hose goes over. Usually with that hose off it will start and run, but will idle like shit and die often. I don't have time to come up and check. I wouldn't think it would be a timing issue. Do you know how to check it with the cover on everything on?