MitsuStyle - View Single Post

niterydr · 11-08-2005

Timing belt stuff-Not all the same.
ACT 2600-It is a bit aggressive of a clutch, you could go with a softer setup.
replace bearings-Always when you have a chance
ARP's and metal-ARP's are nice, john ran 37psi on the stocker headgasket all last season. Actually we have NEVER popped a headgasket now that I think about it. If the surfaces are flat, no reason for a metal. And if the surfaces AREN'T flat, you can't use metal.
bs elim-Always a good idea.

11-08-2005	#2
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: 7Bolt Questions Timing belt stuff-Not all the same. ACT 2600-It is a bit aggressive of a clutch, you could go with a softer setup. replace bearings-Always when you have a chance ARP's and metal-ARP's are nice, john ran 37psi on the stocker headgasket all last season. Actually we have NEVER popped a headgasket now that I think about it. If the surfaces are flat, no reason for a metal. And if the surfaces AREN'T flat, you can't use metal. bs elim-Always a good idea. __________________ My street car runs low 11's and my race car's personal best is a mid 11....