MitsuStyle - View Single Post

Onefast99gsx · 10-23-2005

Hi guys-

Im kinda worried about the stock 2g rods of mine letting lose on me at some point. I figure in running 12.0's, i'm probably running in the 400HP range. I'm doing some research on the Eagle rods for the 2g motors. Can you tell me if these rods will work with the stock 2g pistons that are in my motor?

On Eagles website, it says something that you must use the 1990-1992 bearings.

I don't care to do a 6-bolt swap. For the 2-4 times i goto the track a year and boost up I don't think it's worth it and i'm not gonna spend as much money on my car this winter as I did last. I just wanna make what I have currently, reliable. So I would like to put Eagle rods in, aftermarket valve springs & Ti Retainers. I would be doing this with the motor/crank still in the car. I would hone and re-ring at the same time.

Thanks for any suggestions on these Eagle Rods.

10-23-2005	#1
Onefast99gsx Join Date: Sep 2004 Location: Wisconsin Posts: 1,411	Eagle Aftermarket Rods for 2g Hi guys- Im kinda worried about the stock 2g rods of mine letting lose on me at some point. I figure in running 12.0's, i'm probably running in the 400HP range. I'm doing some research on the Eagle rods for the 2g motors. Can you tell me if these rods will work with the stock 2g pistons that are in my motor? On Eagles website, it says something that you must use the 1990-1992 bearings. I don't care to do a 6-bolt swap. For the 2-4 times i goto the track a year and boost up I don't think it's worth it and i'm not gonna spend as much money on my car this winter as I did last. I just wanna make what I have currently, reliable. So I would like to put Eagle rods in, aftermarket valve springs & Ti Retainers. I would be doing this with the motor/crank still in the car. I would hone and re-ring at the same time. Thanks for any suggestions on these Eagle Rods.