|
Re: Fans not working
OK well I should have looked closer. There's another little fuse box up on the drivers side by the firewall for the AC fan stuff. Sure enough there was a blown fuse. Now it's replaced, 10" hooked up to it, and working! Now I have to just get a new 14" one to replace the broke one. Also, is this OK to hook up the 14" to the stock wiring? All I did for all this was chop off the wiring from my stock fans, then attach it to these new fans. I'm guessing I didn't have to worry about the amount of current going through there since the wiring was already setup for the stock fans which pull a good amount of current too.
|