MitsuStyle - View Single Post

sideways motorsports · 09-21-2005

OK its been 4 weeks or so and I just got this turbo back. Same comp and exh housings just all new internals and WG actuator.

Time to put it to the test now. Since I have also purchased a real MHI turbo as well these things are going on the dyno in the near future.

Bets anyone. Goal is to make 350 with the restrictor in the turbo. I will be measuring tolerances in turbos before and after things like that. Bad feeling that my test is going to get expensive and lead to the ultimate failure of the "knock off" again.

Dan

09-21-2005	#11
sideways motorsports Join Date: Oct 2003 Location: Ramsey, MN Posts: 49	Re: My "Evo III GT" Turbo test results OK its been 4 weeks or so and I just got this turbo back. Same comp and exh housings just all new internals and WG actuator. Time to put it to the test now. Since I have also purchased a real MHI turbo as well these things are going on the dyno in the near future. Bets anyone. Goal is to make 350 with the restrictor in the turbo. I will be measuring tolerances in turbos before and after things like that. Bad feeling that my test is going to get expensive and lead to the ultimate failure of the "knock off" again. Dan