MitsuStyle - View Single Post

TGPilot · 08-31-2005

That is exactly what my welding buddy said...if it was small no biggy, drill a hole at the end and weld it up. With it going up and around the case like that it would be way too much room for impurities to get in and try to clean them out to get a "sturdy" weld.

I appreciate everyone's input though!

Thanks again!
-Kenny

08-31-2005	#11
TGPilot Join Date: Dec 2004 Location: Colorado Springs, CO Posts: 63	Re: For the transmission GURU's That is exactly what my welding buddy said...if it was small no biggy, drill a hole at the end and weld it up. With it going up and around the case like that it would be way too much room for impurities to get in and try to clean them out to get a "sturdy" weld. I appreciate everyone's input though! Thanks again! -Kenny __________________ Showing N/A cars just how slow they are at 6000' above sea-level! 1990 Pontiac Grand Prix Turbo Coupe 222HP / 320ft.lbs @ 3700 RPM 1990 Pontiac Grand Prix Turbo STE 222wHP and 280ft/lbs @ 3850 RPM