It's late, Easy question
 

I can't seem to find this anywhere; granted it's late, I'm tired, bla bla bla....

What are the dimensions of the stock 1G & 2G SMICs including endtanks?

I figured it would be on VFaq, nope. A search of "stock intercooler dimension" on both Toonerz and NABR turned up nothing.

Thanks

Re: It's late, Easy question
 

small x small x small and smaller x smaller x smaller

Re: It's late, Easy question
 

1g > 2g

Re: It's late, Easy question
 

Actual dimensions are what I need.

Re: It's late, Easy question
 

Come on HORT boys, I know you've got to have some SMICs laying around. :D

Re: It's late, Easy question
 

When I get home I can measure them for you Jakey. Or maybe JET or Nash can go outside and measure them if they aren't too busy or it isn't too shitty outside. What exact measurements do you want?

CRAIG

Re: It's late, Easy question
 

Craig I'm looking for the overall measurements (extremity to extremity). Basically I'm looking at using one for a project down here at school. We're turboing a 25hp 3 cylinder diesel engine and have a limited amount of space for an intercooler. So I figured that if one would fit, I could probably find a 1G or 2G intercooler for a decent price and use that.

Thanks

Re: It's late, Easy question
 

Alright, If nobody can get you the info before I get home then I will measure both of them up and get you the info myself.

CRAIG

Re: It's late, Easy question
 

Be sure to post pics and info on this turbo setup..I am VERY curious..I'd like to turbo the lawnmower, but then again..I might be considered a redneck...

-A. Swift

Re: It's late, Easy question
 

Specs on the engine we're using can be found here: http://www.lombardiniusa.com/liqutabl.htm
It is the LDW 903 and I see I was incorrect, it's gross horsepower output at 3600 is 23.06 horsepower. The details of the turbo conversion are still in the works as the project has solely consisted of getting the engine mounted in its new location so far. I'll try to get some pictures and post them up this weekend.

Re: It's late, Easy question
 

I had a few of each smics but I gave the 2g ones to mike because he wanted them. I have so many parts in my garage though. I will get the 1g specs tomorrow if nobody has posted yet.

Re: It's late, Easy question
 

Yeah, I went out there only expecting to find 2-3 2g cores and found a 1g somehow. I came inside and gave up on it.

Re: It's late, Easy question
 

Any luck with dimensions Craig, John, or James?

Thanks

Here's some pictures of the project:

Re: It's late, Easy question
 

...

Re: It's late, Easy question
 

The 2G core is smaller than the 1G core, but it has bigger inlet/outlets.

Re: It's late, Easy question
 

I already chucked them after pulling the inlets/outlest off them, sorry. They are pretty similar in width and height. (the 2G is slightly smaller) The main difference is the thickness, the 1G is probably twice as thick as the 2G.

Re: It's late, Easy question
 

Any *rough* dimensions possible Mike? :D

I am having sexual thoughts about my pillow constantly BTW.

Re: It's late, Easy question
 

I have a 2G in the shop now that is going to be getting an IC later this week, I can get exact measurements for you then.

The pillow thing is a bit wierd though Jake, you sure you want to express those thoughts in public?

Re: It's late, Easy question
 

I'd appreciate it if you could get me the dimensions.

As for the pillow thing, it must have been that 7:30 final I had this morning that set me off in a weird mood. :eek:

Re: It's late, Easy question
 

You must have a lot of finals hahahaha.

I will get the dimensions for you when I start that part of the job. I am thinking wednesday.