MitsuStyle - Cam Cap Bolt Torque Spec

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)

- - Cam Cap Bolt Torque Spec (http://www.mitsustyle.com/forums/showthread.php?t=4519)

Nash	09-01-2004 04:08 PM

Any one know torque spec for the cam cap bolts for a 2.0 head?

john	09-01-2004 04:30 PM

18 ft/lbs is what I believe. Saw theM torqued at QPR.

joem	09-01-2004 04:32 PM

18 is right sir.
joe

Goat Blower

09-01-2004 06:23 PM

Torque 'em til they snap, use the big breaker bar.
:goodluck:

john	09-01-2004 06:24 PM

Quote:

Originally posted by Goat Blower@Sep 1 2004, 06:23 PM
Torque 'em til they snap, use the big breaker bar.
:goodluck:

You do not need a breaker bar to snap them. All you need is a 3/8 drive ratchet. Trust me on this one...

Nash	09-01-2004 07:27 PM

14-16lbs is what I found.

Quote:

Originally posted by Goat Blower@Sep 1 2004, 05:23 PM
Torque 'em til they snap, use the big breaker bar.
:goodluck:

Yeah, I did that. I wasn't using a breaker bar, but I did break one. Lucky Jet is a nice guy and fixed if for me.

niterydr

09-01-2004 08:31 PM

just jump on them ;), they'll go.

Nash	09-01-2004 09:12 PM

Quote:

Originally posted by niterydr@Sep 1 2004, 07:31 PM
just jump on them ;), the'll go.

HAHA! Finally I don't have to do that to get the head on!

Shane@DBPerformance

09-02-2004 05:01 PM

I always use 14ft-lbs.

Nash	09-02-2004 05:30 PM

I used 15ft-lb, but if I can't get this fucking car back together with out anymore problems I'm gonna torch it!

joem	09-02-2004 05:31 PM

Let me get that front mount first.
joe

All times are GMT -5. The time now is 10:43 AM.