MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Clutch Pedal Sticking (http://www.mitsustyle.com/forums/showthread.php?t=4127)

Kougar 07-31-2004 05:39 PM

ok, on my 4th time of putting tranny up, i installed a new master and slave cylinder too. I also went with the old TO bearing since the new one is like 1/8" bigger.

Now the pedal sticks. Basically, it shoots down by itself after a small push about 2/3 the way, then the last 1/3 is normal resistance. Once you let it come back up the 1/3 that it does itself, you have to pull it up the rest of the way. It was bled for about 30 minutes. I even disconnected the pedal to the master and pushed on the actual piston to get a better bleed. It pushed out WAY more fluid, but didn't really help at all.

So now what?


All times are GMT -5. The time now is 05:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.