Anyone local, Twin Cities area, have a 3" GM MAF I can use this weekend? I want to find out if my compresor surge is from the 3 1/2" one that I'm using now and I don't want to buy one until I know for sure.

I have one brand new 3" MAS for a 98 Tahoe Vortec 350 if that will work.

Let me know

i gots a 3" too if want to borrow it

I have one, or Johns auto has a lot of them. I paid $40 for mine.

~John

If you go about 2 miles south of johns there is the fridley auto parts they only charge $25 to $30 for them, i think they have a few left...

I have mine with reducers on and it was a pain in the arse to put on so i don't thinik that is coming off any time soon. otherwise i'd let you use mine.

-E

to run a 3"Maft you have to have the Translator right? How much are the translators?

Enes I might be talking with you shortly on how to hook it up and run it with DSMLINK.

I think with this sized turbo I'm going to need it real quick

the ramchargers MAFT cost $200 new, around 150 used

the dsmlink v2 already can support a MAFT with no extra modficaions, its all plug and play setup. you still need the $200 box though, I don't think anyones cam up with a way to get around using the MAFT box.

I've got one as well if you want to use it. I would need it back later, but you can use it for now. I don't forsee that I would need it inthenear future, maybe by next summer or something.

1st off I said I need to borrow before I buy to make sure that is what the problem is. Second, if you want to talk about a MAFT using DSMLink, or what they cost, start a thread on it. I HATE reading a thread that I started that gets off topic! Just close this thread for me. I know who to contact to borrow one.