Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Got some 17" Enkei RP01s. Each has a some curb rash but with a touch of work could be some real nice looking wheels. 2 tires are newer, the other 2 are pretty spent. Looking for $350

Also for sale is a Holset WH1C. Freshly rebuild by Justin Whitesell aka JusMX141 on most of the forums and a very reputable rebuilder. Recieved a rebuild w/ new turbine shaft and wheel. I have a paypal receipt for $282 spent with Justin. Compressor housing has been sandblasted and shaved down to accept a standard coupler but was never painted or coated. Buyer would need to supply turbine housing and oil feed and return lines and well as finish the painting of the compressor housing if they desire . I will supply the factory drain if someone wants it as well. Was planning on running this myself but ended up with an FP Green. Looking for $365!

14b/16g wastegate actuator. Bought new from extremepsi for $100. Ran on my old 16g for about 3000 miles before swapping to a external setup. Looking for $50

Also have a parts car that I'm looking to sell the remaining bits and pieces off of. It's a 95 talon tsi awd. No engine, trans, or any driveline. Basically just good for interior bits. Gray interior. Let me know what you need!

Pictures available upon request. I would also be open to offers and/or trades. Just trying to get some cash together to get my little shitbox back on the road! Thanks for your time! PM me with any questions!

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

very interested in wheels can u send me pics

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

PM sent!

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Also found a Evo3 O2 housing. Painted with some high temp paint and not the prettiest but good condition. Looking for $50

Old school SBR racing "HAFE" exhaust manifold. Came with one of my parts cars. Has hole for a 38mm wastegate that it appears to have been messed up at one point and has some pretty nasty looking welding. That being said, I'd let it go for $25.

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Specs on wheels?? Width? Offset?

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

PM sent. For anyone else interested they are 17x8 38mm offset

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

I thought I had dibs but no pics lol

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

I was pretty sure I sent them to your number. Ill resend right now. Let me know if you aren't receiving them

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Lots of interest in the wheels, but no money! Someone pick them up!

Also after looking around the national forums and to be a bit more competitive I've lowered the price on the Holset WH1C to $365!

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Found some old school white top 1600cc FIC injectors in the garage today. $185

Vrspeed j-pipe brand new never used. Sold my 16g so I have no use for it anymore. $65+shipping from vrspeed. I would let it go for $50.

Brand new russell stainless rear brakes for a 2g dsm. $40

Brand new russell stainless front brake lines of an evo 8/9 $45

Still got everything else as well. Make some offers guys!

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Still have the rp01's?

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

I acually have them now

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

Well damn you! lol just kidding man, literally am just trying to find an inexpensive set of rims to throw on the girlfriends car so it can get tuned Friday. Her evo 8's haven't gotten back from powder keg yet.

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

I swear I've gotten like 10x more PM/interest in those wheels in the last 3 weeks since I got rid of them than the 4 months I had them for sale before. Hahaha it's funny how that works.

Wheels sold.
Holset sold.
Parts car gone.

Might as well just close this thread! Thanks for the space!

Re: Enkei RP01s, Holset WH1C, 14b/16g wastegate actuator, 2g part out
 

^