Vassil's 9-second 859WHP Talon Partout
 

The time has come to part out my pride and joy. All parts in the car have been purchased new and have about bunch dyno pulls and roughly 15 passes. The car is a 1GA Talon. It made 859WHP when it was a manual. After converting it to an Auto it made 728WHP. The best pass as a manual was a 10.04@152 and the best pass as an auto was a 9.85@143.

Here is a video of the car showing dyno pulls and it's 9 second pass.

http://www.youtube.com/watch?v=Syp8AsOwENw

http://www.bulfab.com/images/t2.jpg

Shortblock - $2000

• 2.4 Long Rod

• ARP Main Studs

• Kiggly Girdle

• Eagle Crankshaft

• Ross 9.0:1 Pistons

• ACL Tri-Race bearings

• Pauter Rods

Head - $1100

• Engintecs one-off head with all bells and whistles (made 859Whp on a 6266)

• Ferrea 1mm oversize valves

• Killer port work

• 5-agnle valve job

• Viton Seals

• Kiggly dual valve springs

Misc Engine Parts

• Fluidampr Crank pulley - $150

• Magnus A-1 Headstuds - $120

• Kelford 280 Cams - $500

• Custom Lollipop Red Valve Cover with -10AN Lines & Dual Chamber catchcan with -10AN lines - $250

Cooling

• Fluidyne Radiator - $150

• Setrab Oil Cooler -10AN Lines - $100

• STM Auto Trans Cooler with -6AN Lines - $120

Intake / Exhaust / Turbo

• Garret 4 inch Intercooler with 2.5 inch inlet/ 3 inch outlet - $600

• 3 inch upper intercooler pipe / 2.5in lower intercooler pipe - $150

• Magnus V3 Cast Intake Manifold - $800

• FFTEC 75mm Throttle Body (/w billet ISC Adapter) - $150

• Punishment Racing tubular T3 header & O2 Housing - $750

• Tial 44mm wastegate with dual springs - $200

• Precision Billet 6266 Ball-Bearing Turbo T3 /.82 AR - $1150

• Hallman Pro RX Manual Boost Controller - $85

• Tial 50mm blow off valve - $180

• Custom 4" Cold-Air intake with K&N Cone Filter - $120

Fuel

• FIC 2150cc Injectors - $600

• Magnus -10AN Fuel Rail - $100

• Turbosmart FPR-3000 Fuel Press Regulator (-10 feed /-10 return) - $200

• FueLab 82803 Fuel Filter (-10AN in and out) w/Aeromotive Fuel Pressure Gauge - $80

• Full-Blown Billet Pump Housing w twin walbro 255HP pumps - $285

• -10AN Feed Line / -8AN Return Lines (stock tank) - $150

• Dual Aeromotive 340lph pumps - $250

Suspension & Chassis

• Shell (10pt Chromoly Rollcage certified to 8.50) - $1500

• Kirkey Seats - $250

• G-Force Camlock 5-point harnesses - $100

• Team Dynamics Pro Race-1 wheels (12 lbs) with MT ET DRAG 26 X 8.5 - $800

• Megan Coilovers - $600

• Jay Racing Rear Toe Eliminator Kit - $100

• Tubular rear Lower control arms - $100

• Tubular Rear Upper control Arms - $100

• Buflfab 1-pc Front Crossmember - $125

Drivetrain

• IPT Built Auto Trans with welded center diff - $650

• Bradco Torque Converter - $1000

• Kiggly Flexplate - $100

• 4-Bolt Rear Diff & Axles - $250

• Auto Transfer Case - $100

• Manual Trasfer Case - $75

• Auto Front Axles - $150

Electronics

• DSMLink v3 rwith 1G ECU - $550

• GM AIT Sensor - $15

• AEM 5bar map sensor - $100

• Innovate Motorsports LC-1 Wideband with Gauge - $175

• Stweart Warner Boost & Oil Pressure Gauges - $50

• Dynatek ARC-2 ignition amplifier - $250

• Hella Vaccum Pump - $120

• Forced Four Shiftbox plus - $150

Brakes

• TCE Willwood 11.5" 4-piston with scalloped rotors (Front) - $850

• TCE Willwood 11.5" 2-piston with scalloped rotors (Rear) - $600

• CNC Staging brake - $100

• Big Brakes with Powerslot Rotors & Brakeman Pads - $220

Exterior

• 1GA VIS EVO Carbon Fiber Hood - $350

• Fiberglass Hatch with Lexan rear window (from John Shepherd's 7 second Talon) - $350

Nitrous

• Zex Nitrous 10lb bottle, lines, Pro 250shot selenoid (Dry) (30,50,75 jets) - $500

http://www.bulfab.com/images/t1.jpg
http://www.bulfab.com/images/t3.jpg
http://www.bulfab.com/images/t4.jpg
http://www.bulfab.com/images/t5.jpg

Re: Vassil's 9-second 859WHP Talon Partout
 

This is a sad day! i wish i was still an auto i would grab that trans in a heartbeat

Re: Vassil's 9-second 859WHP Talon Partout
 

I've never seen a parts list where I literally want everything. Sorry to see it parted though :/

Re: Vassil's 9-second 859WHP Talon Partout
 

I hate you! lol

Re: Vassil's 9-second 859WHP Talon Partout
 

PM'd for rims and tires.

Re: Vassil's 9-second 859WHP Talon Partout
 

Jake, your turn to brake parts next year :) Just kidding ... LOL :D

Re: Vassil's 9-second 859WHP Talon Partout
 

Oh my! I want so badly. How much for whole car?

Re: Vassil's 9-second 859WHP Talon Partout
 

Pm sent

Re: Vassil's 9-second 859WHP Talon Partout
 

Looking to get upper and lower icp. Possibly whole turbo setup if we can make a package deal. Iat sensor. Map sensor. Call me so we can discuss further. 612 876 8827

Re: Vassil's 9-second 859WHP Talon Partout
 

Still have the hood?

Re: Vassil's 9-second 859WHP Talon Partout
 

pm sent

Re: Vassil's 9-second 859WHP Talon Partout
 

Pm sent

Re: Vassil's 9-second 859WHP Talon Partout
 

Pm sent

Re: Vassil's 9-second 859WHP Talon Partout
 

he hasn't been on here for 3 weeks

Re: Vassil's 9-second 859WHP Talon Partout
 

I am aware.

Re: Vassil's 9-second 859WHP Talon Partout
 

just saying he hasn't returned a pm for along time but thats cool that you are an aware person on your own.

Re: Vassil's 9-second 859WHP Talon Partout
 

If he hasnt returned any of your messages, I'll give him a shout and tell him to check this. I know he had to leave the country for 2 weeks due to a family emergency.

Re: Vassil's 9-second 859WHP Talon Partout
 

that would be kinda cool ^ tell him i'll take the cams 2150's and wheels tires. No rush family first.

Re: Vassil's 9-second 859WHP Talon Partout
 

^ I know Leasure already bought the wheels. The shell along with the hod is also gone.

Re: Vassil's 9-second 859WHP Talon Partout
 

^good to know still up for the injectors and cams for sure.