MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)
-   -   2g head (http://www.mitsustyle.com/forums/showthread.php?t=33770)

wildman38 10-31-2013 05:31 PM

2g head
 
Looking to buy a 2g head, would like it to be at least somewhat built. Seeing if I can find a used one before I decide to just order a new one. I have a 2g head set up so I would like to keep that set up so no 1g's.

mark4g63t 10-31-2013 06:16 PM

Re: 2g head
 
i've got a 2g head

wildman38 10-31-2013 06:34 PM

Re: 2g head
 
Stock or does it have some goodies?

mark4g63t 10-31-2013 06:35 PM

Re: 2g head
 
Stock, low miles

wildman38 10-31-2013 06:48 PM

Re: 2g head
 
Ahh alright. I will think about that, I am wanting a somewhat built one cause I am going to put cams and what not in it. I'll let you know, how many miles roughly?

wildman38 11-03-2013 10:03 PM

Re: 2g head
 
Bought a head! From mark4g63t, thanks again man.
Now, looking for some good to great shape door moldings from the out side of 95-96 talons. Let me know if anyone has some! Mainly need pass side but will buy a set if need be!

Jaei Sun 11-03-2013 10:07 PM

Re: 2g head
 
door moldings? the side skirts?

wildman38 11-03-2013 10:10 PM

Re: 2g head
 
No the door strakes I guess you could call them, but the very bottom of the actual door. there is the flat plastic piece that goes the length of the door and is about 4 inches tall

mark4g63t 11-04-2013 08:42 AM

Re: 2g head
 
For the 2gb talon conversion?.. see if tkrperformance (mark) has any.

wildman38 11-04-2013 12:54 PM

Re: 2g head
 
No the very bottome of the door, I couldnt find a good picture for it, hard to explain I guess. I am not sure if the 2gb has them I know my 2ga does and one is bent so I want to replace them.

bigboostingst 11-04-2013 02:48 PM

Re: 2g head
 
Coincidentally I was wondering what that part was called like 4 years ago:

http://www.dsmtuners.com/forums/appe...rt-called.html

I think I ended up finding one on ebay after searching for a solid 4 months. Tough part to find!


All times are GMT -5. The time now is 03:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.