MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Mitsu vehicle parts for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=78)
-   -   WTT my 1995 AWD Mirage Coupe project for a decent running DSM (http://www.mitsustyle.com/forums/showthread.php?t=33244)

punxnotdead185 06-27-2013 11:46 AM

Selling my 1995 AWD Mirage Coupe project
 
I'm getting to the point where this thing is causing me more headaches than I have time to deal with right now and I need something that can get me to work reliably. It runs and drives for the most part right now but I did a half ass job making a front motor mount and the engine twisting is causing the drivers side axle to pop out of its joint, caused me to be late to work twice and I don't have a backup car and can't be having this.
It has a 91 TSi awd rear subframe, could use better mounting on the front mounts IMO.
It has an auto out of the same TSi in it right now with an IPT converter, all it needs the Kiggly mod done, just been driving it around in 3rd because I haven't gotten around to doing it, I have the diodes and everything.
Motor was just rebuilt with Evo 8 pistons on bored out 6 bolt rods, ARP rods bolts and ARP head studs, 3" down pipe, running on AEM EMS v1 with a 3.5 bar map sensor with a base tune, FIC 850s, COP setup with 300m coils, oem external oil and transmission coolers, Walbro 255 in a dsm gas tank that's in the trunk because the stock one must be removed for the AWD stuff. The turbo in the pics has been sold.
AGX rear stuts, Blitz BOV, no intercooler currently because of a lack of room, has black 15" J30t rims on it now also.
It's wired correctly and temp gauge and wipers work, been driving around in FWD because I haven't figured out what needs to be done with the drive shaft so the Tcase is in the trunk, just throwing it up to see what I can get for it, with some work it is an easy 10 sec car even on just a 20g.
I have a few pics in a build thread on here, text 6512786390 with offers, cash is accepted also but I have alot of my time invested so don't super low ball me but I know its in need of alot more work also so I'm flexible. I also have alot of other parts for it also the could go with it, Kiggly front clutches, IPT end clutches, Translab shift kit, fuel cell with all the -8AN feed and -6AN return lines and a 300lph inline pump. Asking $1400 for everything, paid over $2k just for all the parts in it.

punxnotdead185 06-27-2013 12:53 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Don't quote me on this but I think it might be the world's only auto AWD 4g Mirage.

punxnotdead185 06-27-2013 01:33 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
There are some pics here http://minneapolis.craigslist.org/ws...995472987.html

turbotalon1g 06-27-2013 02:07 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
partout?

4seasons69 06-27-2013 04:39 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Might want to cut that up into paragraphs and put the parts in a list otherwise I will assume not many people are going to actually read it

TkrPerformance 06-27-2013 04:58 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Quote:

Originally Posted by punxnotdead185 (Post 432258)
Don't quote me on this but I think it might be the world's only auto AWD 4g Mirage.

There are a few on the mirage board. FYI
Part it out is your best bet

punxnotdead185 06-27-2013 07:22 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Quote:

Originally Posted by 4seasons69 (Post 432302)
Might want to cut that up into paragraphs and put the parts in a list otherwise I will assume not many people are going to actually read it

Tried to but it won't add the spaces at the beginning of each paragraph

punxnotdead185 06-27-2013 07:24 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Quote:

Originally Posted by TkrPerformance (Post 432305)
There are a few on the mirage board. FYI
Part it out is your best bet

Yeah I kinda had a feeling no one would want it but figured I'd try, and I looked around a little and couldn't find any but I try and stay off the Mirage forums, don't like the way it's setup and people are extremely uninformative.

blesi660r 06-27-2013 10:18 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Might be interested in the mtr...

punxnotdead185 06-28-2013 02:30 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Just realized I didn't put this in the cars section being it is technically a running vehicle, if it can be moved mods go at it, anyways if someone wants the whole thing cash $2000 would get everything including the 1990 TSi parts car I pulled the engine out of.

punxnotdead185 08-11-2013 04:40 PM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Still have this thing, has lots of good parts, just want to get rid of it.

Boomdeeze 08-12-2013 02:44 AM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
This link has expired so can't view the pics

punxnotdead185 08-12-2013 09:10 AM

Re: WTT my 1995 AWD Mirage Coupe project for a decent running DSM
 
Quote:

Originally Posted by Boomdeeze (Post 434411)
This link has expired so can't view the pics

Fixed


All times are GMT -5. The time now is 10:48 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.