Holset, FMIC, 6 bolt block
 

Alright I have a few things that need to go,

First off is a Holset big H1C, fresh rebuild so zero shaft play and spins perfect, will let go for $100 because I don't have a turbine housing for it, sold my BEP housing separate.

Next is a FMIC, 2.5" in and out, about 12" tall with a 18" wide 3" thick core, leaks a little not that bad, could be fixed pretty easy. Pipes are a little banged up also. $40 takes it.

Block sold

If interested PM me

http://img.photobucket.com/albums/v6...psabc9ff85.jpg
http://img.photobucket.com/albums/v6...psc7798072.jpg
http://img.photobucket.com/albums/v6...ps1bacabed.jpg

Re: Holset, FMIC, 6 bolt block
 

Anyone able to bring the block and crank to proving grounds? Can't make it to the cities anytime soon.

Re: Holset, FMIC, 6 bolt block
 

Still have this stuff, make me an offer, turbo works with the HX35 BEP housings and is only 4lb/min less flow than an 8 blade HX, 54mm vs 56mm