MitsuStyle - New Mandrel Tubing Bender At MAPerformance!

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Modern Automotive Performance (http://www.mitsustyle.com/forums/forumdisplay.php?f=70)

- - New Mandrel Tubing Bender At MAPerformance! (http://www.mitsustyle.com/forums/showthread.php?t=32946)

maperformance

04-18-2013 02:43 PM

New Mandrel Tubing Bender At MAPerformance!

We are excited to announce the arrival of our latest toy! This mandrel bender will allow us to perform even more custom exhaust work here in house and drastically reduce lead times on fabrication work. We are currently set up to bend 1.75", 2.5" and 3" with plan to possible go bigger in the future. If you have not yet stopped but to see the new facilities be sure to swing through and ask about our current promotions on all labor / installs!

http://www.maperformance.com/rehost/bender.jpg
http://www.maperformance.com/rehost/bender2.jpg
http://www.maperformance.com/rehost/bender3.jpg

Kracka

04-18-2013 02:44 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Oh that's cool!

Goat Blower

04-18-2013 02:48 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Awesome! Doesn't seem like so long ago when we were stuck with press bent crap made at Midas.

89_Colt_GT

04-18-2013 03:05 PM

Re: New Mandrel Tubing Bender At MAPerformance!

'Get Bent' shirt, pfft. I smiled.

turbotalon1g

04-18-2013 04:33 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Nice.

Tachyon

04-18-2013 04:36 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Oh nice!

Are you willing to do custom 1-off exhaust work with the bender based on a client spec?

v8klla

04-18-2013 05:33 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Of course!

Mark Leasure

04-18-2013 05:48 PM

Re: New Mandrel Tubing Bender At MAPerformance!

That's awesome Chris! Does it do aluminum too?

v8klla

04-18-2013 06:12 PM

Re: New Mandrel Tubing Bender At MAPerformance!

You know I'm not sure, we do no intend to setup for it at this time.

turbotalon1g

04-18-2013 06:23 PM

Re: New Mandrel Tubing Bender At MAPerformance!

shitty.

b00sted_spyder

04-18-2013 06:43 PM

Re: New Mandrel Tubing Bender At MAPerformance!

^+1. A 1 piece upper intercooler piping would be nice.

Speedfreak

04-18-2013 07:23 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Nice, congrats!

Good thing I didn't buy the one I was looking at a while back. Two in one town woulda been dumb.

JET	04-18-2013 08:55 PM

Re: New Mandrel Tubing Bender At MAPerformance!

Make that 3, I was looking at one a few years ago too. Looks great guys! Glad to see you guys doing so well and us having such a great resource around.

evotuner

04-19-2013 02:00 AM

Re: New Mandrel Tubing Bender At MAPerformance!

Pretty badass not going to lie

v8klla

04-19-2013 10:01 AM

Re: New Mandrel Tubing Bender At MAPerformance!

Quote:

Originally Posted by b00sted_spyder (Post 428401)

^+1. A 1 piece upper intercooler piping would be nice.

Why not SS one piece upper? We just did our Evo X upper in one piece SS and the Evo 8/9 lower is one piece as well :)

http://www.maperformance.com/map-2.5...-evo-licp.html

CornFed2.4

04-21-2013 07:00 PM

Re: New Mandrel Tubing Bender At MAPerformance!

How bout a side exit exhaust?

v8klla

04-22-2013 09:25 AM

Re: New Mandrel Tubing Bender At MAPerformance!

I don't see why not!

All times are GMT -5. The time now is 10:54 AM.