MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Mitsu vehicle parts for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=78)
-   -   1G/2G parts need to go! (http://www.mitsustyle.com/forums/showthread.php?t=32724)

CornFed2.4 03-01-2013 03:14 AM

1G/2G parts need to go!
 
IF YOU DON'T SEE A STOCK PART ASK


2G specific

Black passenger airbag (no warping)
Black door cards with grey inserts
black center console
black dash speakers pair
Black handles interior
Radio bezels
Black center vent
Black switches (dash, doors, ect)
2G talon tails no cracks (no center)
Black rear speaker covers
Black door sills
95-96 eclipse 95-98 talon headlights w/ blacked out housings (2 sets)
Driver airbags
2G rear subframe (just subframe)
2G driveshaft
2G Auto LSD rear diff
Rust free lower radiator support (cut to weld in)
2G front subframe
2G steering column from steering rack to wheel
Stock 7 bolt awd flywheel
Stock cam gears
2ga fender caps
Non EPROM ecu
2G o2 housing
2G stock mani

[B]1G specific[/]
complete head minus cams (oil stained)
90 awd trans looks to be rebuilt
90 t-case
90-t-case
1ga mitsu center headlight
Non EPROM ecu
o2 housing

1g talon swirls with 205/55/16 like new

Aftermarket

-10an drain line
Blitz DD bov 1G flange
6 bolt lightweight flywheel
Pte 50 trim turbo
Plx wideband with everything to hook up
Tubular o2 housing
Hyundai valve cover
Oil feed
1G SS brake lines
Blitz DD bov


I can get pics of all stuff just text me and I will ASAP

Looking to sell/trade some of the parts I don't need for parts that I do

Prices are for pick up only shipping can be figured out buy buyer on the bigger items
Will cover shipping or add cash for the right deal

Things I need

272/272 and 280/280
H-beam 7 bolt rods
.20 over forged pistons
7 bolt l19s
Permatorque for a 4G63
Beehive springs
Lightweight 16" or 17" rims
Aftermarket shift selector (forcefour, ect)
5857-6262 bb
91 V3 link with EPROM
Tial bov
T3 tubular mani
FP mani
2150cc high z
1000 fic low imp.
Clutch good for 500 awhp
Act streetlight flywheel
SMIM
SS recic o2 for 38mm tial
Tial waste gate

651-269-2314 text perfered. Be considerate of the time please. I'm in Minnesota

Thanks all pics can be found here if not ask and ill get them. NSFW though as there are almost nude ladies in there.
http://m824.photobucket.com/profile/...QbnY8omz0Fk%3D

Alpha D 03-01-2013 11:15 AM

Re: 1G/2G parts need to go!
 
Got ECM LINK V3 :D lol

CornFed2.4 03-01-2013 01:29 PM

Re: 1G/2G parts need to go!
 
Quote:

B]Things I need[/B]

272/272 and 280/280
H-beam 7 bolt rods
.20 over forged pistons
7 bolt l19s
Permatorque for a 4G63
Beehive springs
Lightweight 16" or 17" rims
Aftermarket shift selector (forcefour, ect)
5857-6262 bb
91 V3 link with EPROM
Tial bov
T3 tubular mani
FP mani
2150cc high z
1000 fic low imp.
Clutch good for 500 awhp
Act streetlight flywheel
SMIM
SS recic o2 for 38mm tial
Tial waste gate

^ READ

C3L1CA 03-01-2013 02:04 PM

Re: 1G/2G parts need to go!
 
The red 2g and wheels look awefully familiar. Bump for a good guy!

CornFed2.4 03-01-2013 05:03 PM

Re: 1G/2G parts need to go!
 
The whole red car should look familiar. Lol

Everything is OBO. If you don't like the price pm your offer.

turbotalon1g 03-01-2013 07:00 PM

Re: 1G/2G parts need to go!
 
I have a permatorque.

CornFed2.4 03-01-2013 07:48 PM

Re: 1G/2G parts need to go!
 
I can't buy that from you. You need it so you can build your motor. Text me your asking.

CornFed2.4 03-01-2013 11:54 PM

Re: 1G/2G parts need to go!
 
Stuff sold on tuners list updated

username182 03-03-2013 01:00 PM

Re: 1G/2G parts need to go!
 
Sent a PM on the white fenders....

CornFed2.4 03-03-2013 03:07 PM

Re: 1G/2G parts need to go!
 
Yes have them. Should be rust free. I can get ya pics in a few days.

username182 03-03-2013 03:35 PM

Re: 1G/2G parts need to go!
 
Quote:

Originally Posted by CornFed2.4 (Post 424996)
Yes have them. Should be rust free. I can get ya pics in a few days.

Sounds good, I'll take em as long as they are rust free.

CornFed2.4 03-03-2013 03:38 PM

Re: 1G/2G parts need to go!
 
You got it boss

CornFed2.4 03-04-2013 08:03 PM

Re: 1G/2G parts need to go!
 
Back from vacation all PM's and texts answered. Need this stuff gone.

CornFed2.4 03-06-2013 12:59 PM

Re: 1G/2G parts need to go!
 
Having a baby things need to go!

Also much easier to text than pm'ing me.

username182 03-06-2013 04:57 PM

Re: 1G/2G parts need to go!
 
Sent you a text earlier today and no response? I'm ready to buy man....

turbotalon1g 03-06-2013 05:59 PM

Re: 1G/2G parts need to go!
 
yeah dude, don't you want to make mad cash I'm gonna spend so much on all these parts!
Not like you have a job or anything.

CornFed2.4 03-06-2013 06:10 PM

Re: 1G/2G parts need to go!
 
No job here. Lol. I honestly did not get a text from you. I've been texting people all day including Brownman. So no idea.

651-269-2314 try that number

username182 03-06-2013 06:30 PM

Re: 1G/2G parts need to go!
 
Quote:

Originally Posted by CornFed2.4 (Post 425252)
No job here. Lol. I honestly did not get a text from you. I've been texting people all day including Brownman. So no idea.

651-269-2314 try that number

Ah, there's the problem. The number you PM'd me with was 2414, I didn't think to check here for the number. Some random person got a text this morning asking about DSM parts lol.

4seasons69 03-06-2013 06:35 PM

Re: 1G/2G parts need to go!
 
Quote:

Originally Posted by username182 (Post 425255)
Ah comedian. I texted the number he PM'd me with and he posted in this tread a couple hours later. Not that its really any of your concern though. Thanks for showing me the attitude I can expect from the local mitsu community though..


This def not the attitude you can expect from the local Mitsu community including aaron. This is just how aaron is online. If you ever meet him he is actually a really nice guy.

turbotalon1g 03-06-2013 07:02 PM

Re: 1G/2G parts need to go!
 
I'm sorry, I just enjoy giving people a hard time.
But it is funny when people expect answers right away like cars and shit are the most important thing ever.

I apologize, I can promise I'm helpful.


All times are GMT -5. The time now is 06:02 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.