MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   My mustang build : ) (http://www.mitsustyle.com/forums/showthread.php?t=31769)

golden763 07-08-2012 06:48 PM

My mustang build : )
 
6 Attachment(s)
This is the car i have been building for a while. Havent got it dynoed or anything yet just been bringing it here and there to car shows. These pictures have been from the last 6 months of building probly. Just wanted to see what everyone thought.

golden763 07-08-2012 06:49 PM

Re: My mustang build : )
 
4 Attachment(s)
more pictures

carltalon 07-08-2012 06:55 PM

Re: My mustang build : )
 
Nice. I wanted to get a SN95 mustang this winter but ended up getting my 2G instead. very cool build. What motor is That

golden763 07-08-2012 07:10 PM

Re: My mustang build : )
 
its just a 355 with hyper pistons but scat crank and rods with all arp studs. 4 bolt main block with gasket matched heads and 2.02 1.60 valves

golden763 07-08-2012 07:10 PM

Re: My mustang build : )
 
o ya its a 350 sbc with a turbo 400 if thats what u meant lol

93gtpeater 07-08-2012 07:11 PM

Re: My mustang build : )
 
Does it hook? Would be great to see it in person. You should come down to sears parking lot on a friday night

golden763 07-08-2012 07:27 PM

Re: My mustang build : )
 
It kinda does depends on the day going to eoork on it tonight actually need it done by car craft and it looks shitty in person lol

turbotalon1g 07-08-2012 09:36 PM

Re: My mustang build : )
 
Looks like a of potential there.

Constant_Project21 07-08-2012 09:53 PM

Re: My mustang build : )
 
Nice! I have a 95 with the 5.0. Mine isn't anything fantastic, but they're fun cars. I'm putting some cash aside for something fun to put in it this winter!

golden763 07-09-2012 12:58 AM

Re: My mustang build : )
 
Ya goes pretty good got a shop in Blaine I can pretty much do anything. Lol I tore the dash out today to fix some hacked wiring and make a spot in the fire wall for my down pipe

golden763 07-13-2012 12:58 AM

Re: My mustang build : )
 
6 Attachment(s)
some more pictures of progress and my dads projects

golden763 07-13-2012 01:00 AM

Re: My mustang build : )
 
1 Attachment(s)
oppps well thats my daughter lol. Now a little info that 70 chevy is on a 01 superduty frame with a 500 6bt cummins with a turbo 400 and the red mustang is his 95. Got my wideband in my stang and then tore the dash out lol and working on putting my new radiator in that is out of a 80's ford pickup

Halon 07-13-2012 11:03 AM

Re: My mustang build : )
 
All that orange reminds me of Tom's old DSM. Should be fun. Nice Wastegate.

jrohner 07-13-2012 05:32 PM

Re: My mustang build : )
 
I think your missing the FORD engine.

evotuner 07-13-2012 07:34 PM

Re: My mustang build : )
 
What kind of power are you hoping for?

golden763 07-13-2012 07:37 PM

Re: My mustang build : )
 
That's wat makes it a good Ford engine lol..... and hoping for 600 which I'm prolly close I'm running over 15 pounds now no reason shouldn't make at least 600

evotuner 07-13-2012 10:18 PM

Re: My mustang build : )
 
Quote:

Originally Posted by golden763 (Post 409969)
That's wat makes it a good Ford engine lol..... and hoping for 600 which I'm prolly close I'm running over 15 pounds now no reason shouldn't make at least 600

Nice, dynojet or mustang dyno?

93gtpeater 07-13-2012 10:24 PM

Re: My mustang build : )
 
Iam sure at the crank or dynojet. Thats alot of power for that motor. I wanted to do the same thing to my camaro. 350 with a single turbo budget build.

golden763 07-14-2012 12:13 AM

Re: My mustang build : )
 
Don't really know the difference between mustang or dynojet and dunno pretty sure 600 is very doable with that motor

evotuner 07-14-2012 10:43 AM

Re: My mustang build : )
 
dynojets read higher numbers, mustang dyno reads lower also known as the heartbreaker lol.

for example my car would be close to 500 on a dynojet after putting 425 on a mustang dyno


All times are GMT -5. The time now is 10:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.