Very basic question..... I just wanna know if the FPBig28 will directly bolt on to a 2g GSX manifold? Or will you need an install kit? :dsmrule: :goodluck: :dsmrule:

It should bolt right up.

bolts right on

Kool thx alot guys for answering my question.

i'm assuming you aren't bolting it up to your 90 dsm right??? if so, just go with a 16g, that one is a direct bolt on, the t28 isn't for the 1gs, you need the 2g water and oil lines.

Dustin

if you have a 2g eclipse then yes, the big t28 bolts right in uses same water lines and oil lines..


if you are puting it on a 1g eclipse then you would be better off going with a big 16g or other.

also you might have a 2g manifold which might be confusing you.. they are identical except the runners etc etc... they bolt up identicly so no worries there.

-E

Also, if you are getting one, make sure it is for a dsm and not a nisan or other car. It will not bolt up if you get the wrong one.