1G Head Feed Blockoff Bolt
 

Just wondering what sort of seal you guys are using in between the bolt and the head as far as the blockoff. I have the correct size bolt blocking the head feed, and it is currently leaking oil from the port.

I was wondering if you guys used copper crush washers or the like to it. Also, does anyone simply sell a head blockoff kit?

Re: 1G Head Feed Blockoff Bolt
 

I would try a crush washer. maybe a small dab of rtv. (not 3 tubes like Tom would use) LOL

Re: 1G Head Feed Blockoff Bolt
 

I'd use a crush washer and make sure the head surface and the bolt is as clean as possible. Should cure the leak.

Re: 1G Head Feed Blockoff Bolt
 

Im using this, used a drop of red threadlocker.

http://www.everestphotography.com/bl...et_screw41.jpg

Re: 1G Head Feed Blockoff Bolt
 

Are you talking about the oil feed to the turbo? If so here you go

http://www.extremepsi.com/store/prod...cat=263&page=1

Re: 1G Head Feed Blockoff Bolt
 

ha, I saw that same thing going for $20 on fleabay.

Re: 1G Head Feed Blockoff Bolt
 

$20 holy shit looks like I need to start selling them on there for $15