1g exterior parts
 

I'm going through all of the crap I've accumulated over the last few years and came across some exterior pieces from a 1gb.

Here is what I have:

Both electric mirrors from a burgundy Talon. Both mirrors worked when we took them off of the car. Passenger side is in really good shape, just a few spots of clearcoat that chipped off. The drivers side one has a crack on the outer case. It doesn't affect operation or mounting. If any of the older forum members remember my ex-girlfriend Terina's 92 Talon, that's where these came from.

Two molding pieces on the drivers side fender that sits between the wheel and the door. One is black and one is burgundy. Both are in really good condition with only minor wear on them.

Make me an offer on them. I just want them gone to someone that can use them.

*** I found a set of 1gb coilpacks.***


***I also have a box full of old engine mounts, engine accessory brackets and tranny mounts that someone can have if they want it. Don't ask for particular mounts, just take the whole box. Free for the taking.***Gone***

***I also have a cyclone intake. It has been cleaned up but it is missing the actuator and the 3 pieces are not bolted together. It is in excellent shape.***

*** 6-bolt Piston Rings, Rod Bearings and Main Bearings. Bearings are Federal Mogul and the rings are Beck/Arnley $100 for everything ***

*** Bosch O2 sensor 13598 Brand new. $25 ***
Email me at awd1dr@yahoo.com or PM me here. The parts are in Rockford, MN but could be brought into Hamel (where I work) and picked up there after work (5pm Mon-Fri).

Re: 1g exterior parts
 

Came across some more parts tonight. Interior and engine pieces this time.

3-4 Twin single DIN radio surrounds for 1g's. ** Gone **

2-3 instrument cluster surrounds ** Gone **

1 1g side mount intercooler in ok shape. Has a small leak at the bottom.

1 1g throttlebody elbow

Pivot turbo timer with 1g harness

Apexi AVC-D boost controller and solenoid (5 knob identical to the original SAFC). Has 3 rpm settings, speed setting and scramble boost (stays at boost setting for a specific amount of time after pressing an add on button). It worked well in my 1g when I was using it.


Again, everything is basically "make me an offer". I'll keep updating this thread as I find things.

Re: 1g exterior parts
 

I cannot even find a "Pilot turbo timer" anywhere on Google or Ebay so I have no clue what to offer. Could you post some pictures of it?

Re: 1g exterior parts
 

I'd like a few of them twin single DIN surrounds please.

Re: 1g exterior parts
 

Sorry, the turbo timer is a Pivot Flat Full Auto Turbo Timer. I misspelled it. If need be, I also can get the PDF for the instruction manual. I don't have a pic of it right now.

Aaron - How many you want? When do you want them? Drop me a line.

Re: 1g exterior parts
 

First post updated...

Re: 1g exterior parts
 

I'll take some of those instrument surrounds too, I just need to figure out when I can make it out there.

Re: 1g exterior parts
 

Ok. Let me know. I can bring them to work if you give me a days notice.

Re: 1g exterior parts
 

Here are a few pics of the turbo timer.

Re: 1g exterior parts
 

Re: 1g exterior parts
 

Re: 1g exterior parts
 

I'm going to try and meet up with you on tuesday or wednesday this week for the DIN surrounds and instrument cluster surrounds.

Re: 1g exterior parts
 

Have you figured out when you'll be there? I have the stuff with me today. Otherwise I can bring it tomorrow also.

Re: 1g exterior parts
 

^give me a text when you get off work, i'm heading to saint louis park area, maybe we can figure out somewhere, if not tomorrow morning I can meet up.

Re: 1g exterior parts
 

Second post UPDATED.