![]() |
'95 GSX 5 spd
Alright, long story short I was offered a job in Las Vegas. I have to be out there way sooner than I thought and I need this car gone asap.
What it is and has: '95 GSX 5 speed 131,000 on it 6 Bolt Swap Wiseco Pistons 8.5:1 compression ratio Manley H beam rods Stage 3 port and polish 1g cylinder head with Crower Springs and +1mm valves HKS 272's ETS Shortest route front mount 4" thick and anodized black Magnus Intake, from back when Magnus anodized things still and it is black as well. 1g throttle body. Brand new and bored to 63.5mm Evo III 16g DSMlink V2 Fidanza 4.3 clutch and flywheel Stoptech 4 piston brake system up front Evo Brembos for the rear with brand new Stoptech rotors (need installed) Gramlight 57F's in Time Attack Colors (Stupid rare and light) B&M Short Shifter ARC shift knob Evo 9 recaros A TON of other shit I am forgetting What it needs: Needs a battery Has a boost leak somewhere around the intake mani, I have search and searched. Short of pulling off the intake mani and redoing that gasket I have done everything else. Just no time. Temp sensor plug needs replaced. Not the sensor, the plug. Wire broke and it is too close to the plug to solder them. Oil Cooler needs mounted and hooked. One strut tower needs repaired. It has rusted through. Car WILL need to be trailered. Every extra part I have goes with this car. I have a 2gb front bumper and a ton of other stuff. I just need it gone. I am asking for $3000 obo. This is the cost of the wheels and brakes alone. If I had the time I would part it out, but I don't and I won't. It goes all or nothing. Basically how it looks now minus the stoptech's up front. http://i60.photobucket.com/albums/h2...3/IMG_0850.jpg Build thread on here for it http://www.mitsustyle.com/forums/showthread.php?t=16934 John Forgot the Toda cam gears, HKS Super Dragger Exhaust, 3" down pipe, FP Exhaust Mani (coated) |
Re: '95 GSX 5 spd
Why does it need to be towed? If someone brought a battery?
|
Re: '95 GSX 5 spd
Not tuned and the boost leak is bad enough it does not run well. Also that temp sensor plug needs to be changed to get it to idle.
|
Re: '95 GSX 5 spd
This is a shame. Store it somewhere man!! BTW, you didn't tell me you were friggin moving! You should part some things out. :)
|
Re: '95 GSX 5 spd
If it doesn't sell then I will. Didn't know I was moving until yesterday. Applied for some stuff and one came back and called me yesterday. Offered me the job and said can you be here the 8th of Aug. So, off I go. Check your FB fool.
|
Re: '95 GSX 5 spd
Launchhard and I checked out this car yesterday. Like the seller posted, its got a lot of nice parts. All it needs is some time to clean it up, finish up some things here and there, and it'd be a nice car. Unfortunately, probably more time than I/we have right now, but its great for someone looking for a small project.
GLWS |
Re: '95 GSX 5 spd
Thanks for coming out and looking at it.
|
Re: '95 GSX 5 spd
Let me know when I can steal your seats and other misc parts. :) My car should be on the road within the next couple months.
|
Re: '95 GSX 5 spd
Pending Sale.
|
Re: '95 GSX 5 spd
Those Blitz gauges come with it too?
|
Re: '95 GSX 5 spd
Yes. Everything I own for the car goes with it.
|
Re: '95 GSX 5 spd
Once the evo sells tomorrow, I would like to look at this. Is it still available?
|
Re: '95 GSX 5 spd
Sorry everybody who PM'ed me about it today. It is sold. Sad day.
|
All times are GMT -5. The time now is 03:41 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.