WTB: 2.5" Stainless Mandrel Bends
 

Anyone have some 2.5" stainless bends locally before I start shopping ebay? Or even an old 2.5" stainless exhaust or old IC piping or whatever. Anything that I can cut up to use for the exhaust on Teh Bean.

Mainly looking for 304SS, none of that 409 crap, and no mild steel. And of course, the cheaper the better, and donations are the best!! :D

Re: WTB: 2.5" Stainless Mandrel Bends
 

http://www.heartthrobexhaust.com/
it is where I get all my bends

Re: WTB: 2.5" Stainless Mandrel Bends
 

I have some foo.

Re: WTB: 2.5" Stainless Mandrel Bends
 

I may have a couple. What kind of bends are you looking for?

Re: WTB: 2.5" Stainless Mandrel Bends
 

Ideally I'd end up with four 45* bends and a U bend. But will work with whatever I can get on teh cheap.

Re: WTB: 2.5" Stainless Mandrel Bends
 

I don't have any U bends, but I am almost certain that I have 45-degree. I just need to verify the material for you. They are yours for free if you comes get them.

Re: WTB: 2.5" Stainless Mandrel Bends
 

I have a large 2.5" SS pipe, it's a big U-bend, but you could cut it apart into some 45's if you want. It's the larger pipe near the bottom of the picture (next to my free resonator haha): http://mitsustyle.com/forums/attachm...chmentid=11047

The bend isn't very tight so I'm not sure if you want to use it or not, but it's free!

Re: WTB: 2.5" Stainless Mandrel Bends
 

Andrew that'd be perfect.

Sparky that also sounds good. Just lemme know what you have. Where you located at?

Re: WTB: 2.5" Stainless Mandrel Bends
 

When do you need this by? Not sure the next time I'll be in the cities, I could ship it though.

Re: WTB: 2.5" Stainless Mandrel Bends
 

When do you think you'd be in town again? I'd think I'd be interested in trying to get it within the next 3 weeks or so...

Re: WTB: 2.5" Stainless Mandrel Bends
 

Any update? And where do you live at if I were to try and come get them?

Re: WTB: 2.5" Stainless Mandrel Bends
 

I should be up there next week, I need to stop by Adolph's to drop off two catalytic converters so I'll be in the neighborhood.

Re: WTB: 2.5" Stainless Mandrel Bends
 

sweet, gimme a ring when you're near by!!!