MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Tuning/Electrical (http://www.mitsustyle.com/forums/forumdisplay.php?f=90)
-   -   Power to coil,but no spark 2g (http://www.mitsustyle.com/forums/showthread.php?t=29563)

justinhill 04-30-2011 07:40 PM

Power to coil,but no spark 2g
 
i clean/degrease my motor it ran fine.. So I decided to take it around the block the car turned off and would not start.. So I check to see if i was getting spark no spark. I check to connector to the coil with a test light and I'm getting power there could it be a bad coil or power transistor pack from the water hitting it? also I'm getting gas pressure.

backwoods 04-30-2011 10:59 PM

Re: Power to coil,but no spark 2g
 
Sounds like you got water damage. I would replace coils.

justinhill 05-01-2011 07:46 PM

Re: Power to coil,but no spark 2g
 
Different coil pack still no spark different power transistor still no spark anymore idea's?

95talonracer 05-01-2011 08:22 PM

Re: Power to coil,but no spark 2g
 
CAS? or ECU

CornFed2.4 05-02-2011 09:54 PM

Re: Power to coil,but no spark 2g
 
You need a new cas. If your check engine light comes when you turn key, then shuts off after 5 secs. Its not the ecu.

justinhill 05-04-2011 06:20 PM

Re: Power to coil,but no spark 2g
 
Put in a new cas still no spark.....

CornFed2.4 05-04-2011 06:51 PM

Re: Power to coil,but no spark 2g
 
Is your ecu powering up? Did you check for spark on all 4? Did you hook it up to the ac? They have the same triangle plugs on the harness.

justinhill 05-05-2011 08:05 AM

Re: Power to coil,but no spark 2g
 
Found the problem crank sensor is not reading FML.... thanks for the idea's guys.


All times are GMT -5. The time now is 03:22 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.