to Apple valley and puts my Tranny Back on.

If you have not done and AWD clutch/flywheel install do not come "learn" on my car.

If you put everything back to gether I'll make the deal sweeter.

I have air tools.

I dont have time to figure this shit out myself right now.

Thanks

Craig

612-481-7680

too bad im still in az or id be over there right now

Whats different with an AWD setup that a standard transaxle? Other than the X-Fer case. If nothing, no problem, I can do it.

damn too bad im still in duluth

JustROLLIN - main question I had other than needing help getting it back on is the rear motor mount and the teeth of the flywheel touching the starter teeth.

If you want come on down, where do you live?

Well I am at work until later tonight so I wouldnt be able to make it down tonight.

The teeth of the flywheel should not engage the flywheel until the key is actually cranked. The drive gear (pinion gear) on the starter is pushed out and meshes with the flywheel. Its held in place through electromagnetism until the engine starts. The pinion gear is then released from mesh.

So, the starter is as easy as bolting it back into the original holes

Thanks, I guess all I really need is some help lifting the tranny back onto the the shaft. It fell off of the tranny jack.

Give me call tommorrow whenever you feel like stopping by. However, if I get ambituos I may just do it myself tonight.

thanks

Craig

I too can help you out. I've just taken my trans in and out about 3x's the last couple weeks (don't ask). I know exactly where everything goes and how to do it the most efficient. Let me know if you need a hand.

::scratches chin:: :goodluck:

FORSFED I'll give you a call around 12:30

hahaha no ones got me bet except maybe ecoli on pullin dsm tranny's and putting them back in... mines been in and out repaired by me god knows how many times... i hate breaking parts! I'll do it all if you still need help fly clutch and back in w/fluid and all let me know if you need help i have all the tools too! 612-865-7668 my cell give me a ring

oh btw is this a 1g or a 2g?

Hey when do you want to do this?

I can do it tonight if your interested. Also do you happen to have a truck?

I'd like to bring over my engine hoist so I don't have to bench press the damn thing in there.

IF you don't remember I'm Brian that lives down the street from you.

-Brian
ps: i can come over after work. And I need the money to finish my car

You sure about that? I did 30+ DSM clutch swaps back when I used to do that crap, not to mention how many times I've done it on my car in the last 5 years. :whipped:

You sure about that? I did 30+ DSM clutch swaps back when I used to do that crap, not to mention how many times I've done it on my car in the last 5 years. :whipped: [/b][/quote]
lol dude i suppose i should'a "..." that to make the sarcasum stick out...I cant spell im retarded... but now that i think about it I'm getting close to that 30 mark for sure

im way over 30 :).
and I don't even have one anymore!?!

Thnaks to forced fed its all back to gether now.

Thanks for the calls Brian.

Thanks again guys for the help

Glad to hear you got it all back together. Now sign up for the Mayhem event! hehehe

Sorry I just want as many dsm's as we can get at this event

-brian

ha haha, thats what me and my dad did to change the clutch on my truck.

Thats what a jack is for :stick: