DSM rear end work, combining a 3 bolt and 4 bolt
 

Is there information on this, I can't remember exactly but I believe it is good to use the internals from a 3 bolt in a 4 bolt.

I ask this because I have a 3 bolt rear end currently in my car and a 4 bolt waiting to go in, so this would be the perfect time to do something like this.

Thanks
Aaron

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

IIRC, you can put the 4 bolt gears inside a 3 bolt diff...a few of GVR4.org people have done it. I'll try to find the thread and link it here.

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

Thanks man. I'm probably just gonna run the 4-bolt as-is, but this is something I've always wondered about doing.

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

What is the reasoning behind this?

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

wondering this also, is the 3 bolt casing lighter? or something of this sort maybe, interesting

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

Mr. Lacroix has done this before. I believe it's the 3-bolt pinion in the 4-bolt housing make for a stronger set up.

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

For the Galant VR4 guys it works well to swap the 4 bolt diff into the 3 bolt housing, keeping the 4ws is a plus. I heard a while back the 3 bolt ring and pinion is stronger then the 4 bolt. It takes some more time installing the 4 bolt diff, setting the back lash and gear pattern.

~John

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

I found for my uses a stock 4-bolt will be fine. Time to flush and fill.

Thanks guys.

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

if you dont mind me asking, what are you gonna put in it?

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

um, my dsm.

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

You and not reading posts. :) Are you wondering what kind of fluid or what?

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

75 140 synthetic, or shock proof heavy. What else would you put in the rear end of a dsm.

~John

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

lol yeha sorry i guess i wasnt clear enough i mean what fluid are you gonna fill it with

Re: DSM rear end work, combining a 3 bolt and 4 bolt
 

I just suck at reading, but read what john put, that is my exact same answer.