4G15 head bolt torque and valve lash
 

Free mojito for the first person to correctly tell me the head bolt torque and valve lash settings for the 4g15 I am screwing together.

Re: 4G15 head bolt torque and valve lash
 

What car is it normally in?

Re: 4G15 head bolt torque and valve lash
 

Sorry, that answer only gets you a Shirley Temple.

Re: 4G15 head bolt torque and valve lash
 

It is a motor found in colts, eagle summits and mirages, and a bunch more. This one is from a 94 eagle summit.

Re: 4G15 head bolt torque and valve lash
 

Using sequence shown in Fig. 4, tighten cylinder head bolts in two or three steps to a final torque of 53 ft. lbs . Cylinder head bolts must be tightened in two or three steps to ensure correct cylinder head to cylinder block seating.

VALVE CLEARANCE SPECIFICATIONS

Intake, Inch
Hot 0.008
Cold 0.004

Exhaust, Inch
Hot 0.010
Cold 0.007

Re: 4G15 head bolt torque and valve lash
 

Thanks Shane. The car runs and hasn't pushed out the head gasket or banged any valves so I guess you get the mojito.