hx 35
 

I have a 1g with 272 cams and a evo3 16g with afc what inj size would i need to run hx35 on e85 and do they still make a hot side to bolt on a dsm. And if the afc would work for now to i get a link. I want something to make 400 awhp or 450 awhp.

Re: hx 35
 

well you gonna need some decent injectors 1200cc+ i have been thinking about going this route myself, the housing your thinking of is a bep bolton housing and yess it bolts right up and there are multiple options for internal wg or external, as well as a .55ar or .70ar as for the afc working its not gonna work on injector that large, yor gonna have to run link or get a eprom chip tuned by shane..

Re: hx 35
 

I have a maft wouldnt that work for the inj. Or would 650 work for 92 pump gas.

Re: hx 35
 

^^650's are much too small for pump gas even, i would say 780's atleast, i think you under estimate the power of the hx35.. and no, the maft is to crude of a tuning tool

Re: hx 35
 

what power would i get out a hx35 400awhp or more.

Re: hx 35
 

more depending on your setup
heres a good page i found
http://integralmotorsports.com/holset-turbo-tech/

Re: hx 35
 

if i remember right, the hx35 is good for 550-600 hp.

Re: hx 35
 

If I was you I wouldn't cheap out on injectors.. I bought 1350's for my scm61 and now that I'm gonna run my bb billet 35r I wish I went with some 1650's..

Re: hx 35
 

Holy shit punctuation ownz this thread. Can hardly read this shit.

If you want to make decent/big power with an HX35 I would go with a T3 exhaust housing, otherwise they seem to make E316G type power with the mitsu bolt on housings. I would get something more than a SAFC to tune it with though if you're going for 400-450HP, this isn't 1998 ;)

Re: hx 35
 

i want to put a link in the car but the founds r not there right now and i just need to get the car running so i was thinking that the afc would work for know just not so i blow it up that is what i care.

Re: hx 35
 

I would sell the afc and get a eprom ecu.. then get a custom eprom chip tune by shane its the next best after link.

Re: hx 35
 

This.




.....goddamn, I feel like I am reading a thread written by a kindergartner.....

Re: hx 35
 

cool:spin:
hx35's have hit 500awhp with the bolton housing, you just have to get the external gated not internal.

Re: hx 35
 

Remember though, power ratings are never correct for a poorly set up car. Hell a SCM61 can hit 650hp or more, but not on an SAFC with 680cc injectors. Just because its rated for that doesnt mean if you bolt it on it will hit that.

Re: hx 35
 

thats what i tried to explain to him above, he needs at least 1200's if he wants to run e85 and hes gonna need a chip or link.

Re: hx 35
 

what inj. size do i need for my e316g to run e85. like 1000 or bigger then that

Re: hx 35
 

950cc, 1000cc, 1050cc work well.

Re: hx 35
 

Well, if you don't have the "founds" to get a real tuning device, you sure shouldn't be talking about a huge turbo. Get the supporting stuff like link and injectors now, then worry about turbos when you scrape together some "founds".

Re: hx 35
 

dose any body have a dsm link with a eprom ecu for sale i would like to get one.

Re: hx 35
 

try searching in the for sale section, or make a WTB thread in the WTB section