WTB: Turbo 400-600hp capable!
 

I am looking for a turbo that is 400 to 600whp capable. I prefer it to be oil cooled, mitsu housed, and has the anti-surge cover on it. My SBR G60 is on its way out and I'd like to find a direct replacement.

Turbo's I have been looking at are:

HX-35 (mitsu housing or t3 would be fine)

HX-40 (mitsu housing)

BW s256-258 (extended tip/mitsu housing)

And my last option..
SC6152 (mitsu housing)

I'm looking more for used since money is tight but let me know what you got!

Re: WTB: Turbo 400-600hp capable!
 

Well I have the scm6152 if your interested. Check out my parts thread.

Re: WTB: Turbo 400-600hp capable!
 

400-600hp is a ridiculously wide range.

I wouldn't waste my time on another DSM bolton housing for a Holset, they're pointless IMO, plus they're getting more expensive every day. Just get a T3 manifold and run the stock holset housing.

I have an extra Holset but it's ripped apart, so it'd need a rebuild kit.

Re: WTB: Turbo 400-600hp capable!
 

I have a Garrett GT3076R with the anti-surge cover and mitsu housing, but it's water cooled.

Re: WTB: Turbo 400-600hp capable!
 

I put down 579 hp at map with my ball bearing scm6152 on my eclipse that I may part out. PM me an offer on the setup with water cool lines and oil lines if you need all of that.

Re: WTB: Turbo 400-600hp capable!
 

I saw that. If I dont come across anything I'll definitely be getting a hold of you.

How many miles on it? How much shaft play? I remember you replacing it with a 16g, is there anything wrong with it?

Re: WTB: Turbo 400-600hp capable!
 

I'm not entirely sure how many miles are on it. Shaft play is normal, and I replaced it cuz I wanted the faster spool of the 16g. The only thing wrong with it is that the turbine wheel is slightly nicked. Not enough to hurt the performance of the turbo though.

Re: WTB: Turbo 400-600hp capable!
 

How much? Can you send me some pics?

Re: WTB: Turbo 400-600hp capable!
 

If you decide to go T3 instead, I have a SC61 that is still bolted onto the manifold and 02 housing from my 1g, I could make it a package deal.

http://farm6.static.flickr.com/5042/...3394d0e997.jpg

long shot, but figured I would try

Re: WTB: Turbo 400-600hp capable!
 

PM'd

Re: WTB: Turbo 400-600hp capable!
 

I have a FP HTA 3082 I'd let go for a pretty good price for a local.

Re: WTB: Turbo 400-600hp capable!
 

Picked up Kevin's 3076 last night. Thanks for all the offers guys!